SEAPRO SLIDERS FOR DIGITAL SLR CAMERAS AND HD VIDEO CAMERAS
The Seapro Slider is designed to allow controlled dolly/slider shots with your
DIGITAL SLR AND VIDEO CAMERA equipment, both manual and powered versions.
HEAVY DUTY SLIDER £675 plus vat.High Hat mount £120 plus vat.
PAN
AND TILT HEAD NOT INCLUDED.SPECIFICATION.. SEAPRO SLIDER HD.
1 METER TRAVEL, HAND CRANKED TO CONTROL SPEED, FOUR ADJUSTABLE FEET, THREE TRIPOD MOUNTING POINTS, 1/4" AND 3/8" THREADING, COMES WITH ADAPTOR PLATE FOR DIFFERENT HEADS.
TENSION ADJUSTER BUILT IN.
CALIBRATION TAPE FITTED TO AID POSITIONING ON SLIDER.
Adaptor plate is held by four countersunk screws, to allow fitting your own pan and tilt head, we have a top hat adaptor for heads with extended control bars.
1/4" and 3/8" holes provided for mounting, as with the three tripod mounting points.
The ADJUSTABLE TABLE TOP BARS are fitted with screw adjustable feet for levelling, with 50mm adjustment on each .
HIGH HAT MOUNT, for Pan and Tilt and Fluid Heads.
EUROBOSS MOUNT AND ADAPTOR PLATES
EUROBOSS MOUNT FITTED WITH M12 TO FIT FEMALE
MOUNT, WITH 3/8 WHIT FOR TRIPOD MOUNTING.
THREE COUNTERSUNK TO MOUNTO TO PLATE AND ADAPTOR.
EUROBOSS
MOUNT EB01 £125 PLUS VAT
RISER
ADAPTOR TO CLAMP EUROBOSS EB02£94 PLUS VAT
2OOMM SQ MOUNTING PLATE WITH THREE 3/8 WHIT THREADED
MOUNTING HOLES, FOUR 6MM CORNER SCREW HOLES. EB03
£65 PLUS VAT
EXTEND YOUR RISER, REPLACES STANDARD LEGS, LEGS SHOWN WILL RAISE FROM 600MM TO 1 METER, OTHER LENGTHS CAN BE PRODUCED.
SET OF THREE LEGS READY TO REPLACE THE STANDARD FITTED LEGS.
£580 PLUS VAT.
